Our Warranty & Return Policy:

Warranty Info

Any stock (non performance) engines purchased from JDM Engine Corp. includes a 30-day warranty starting on the date shown on invoice. Any performance engines (i.e. all turbocharged, supercharged, V-TEC Engines, KL-ZE Engine) include a 14-day Installation & warranty also starting on the date shown on invoice. The warranty covers only internal parts of the engine block and head and does not cover transmission and related parts such as clutches, flywheels, flex plates, distributors, alternators, a/c pumps, power steering pumps and torque converters. All Rotary Engines (13B-T, 13B-TT, 13B-RE & 20B 3 Rotor) do not come with any kind of warranty, we make sure that the engine is not blown and locked and sold as is. The transmissions also come with 14 Days Installation & Warranty if bought separately. In the event of a defective engine block or head, JDM Engine Corp. will be responsible to replace or fix the defective part, at our discretion (if under warranty).

Conditions

JDM Engine Corp. is not responsible for installation or improper use of any engine sold to a client, therefore the following parts and circumstances are not covered by our warranty:

1. All external parts of an engine such as axles, power steering, a/c pump, intake & exhaust manifold, carburetor, alternator, distributor, starter, emission control device, thermostat, belts, hoses, clutch, flywheel, pulley, wiring, computer (ECU), transmission, turbocharger unit, fuel injectors, gaskets, sensors, and any plastic trim pieces.

2. The loss of engine, if the engine is red-lined or competitively raced.

3. The loss of engine as a result of insufficient amount of oil in the engine.

4. Any labor for installation or removal of any defective part of an engine.

5. Any damage to the engine due to improper installation.

6. Loss caused by modification or forced induction (NOS, Turbo, Supercharger) for which the engine was not designed.

7. Loss caused by overheating of the engine, unless overheating is the direct result of the failure of an internal part of the engine.

8. Any tune-ups and adjustments in belts, hoses, filters, spark plugs, emission control devices, etc.

9. Decrease in performance of any covered part due to normal wear and tear, unless actual breakdown occurs.

10. If a Certified Mechanic does not install engine, the warranty is void.

11. The warranty is void if engine or transmission opened.

JDM Engine Corp. will not be held responsible if the engine purchased does not fit into the designated vehicle. Before purchasing the engine, the customer must verify that the engine will fit into said vehicle. We are not responsible for the failure of emissions and smog tests.

Sales & Shipping Policy

1. No refunds or exchanges, 3% extra fees on all credit card or paypal payments or simply send us a wire or money order payable to JDM Engine Corp.

2. No Deposit refunds.

3. $40.00 service charge on returned checks.

4. All refused orders will be charged 30% of the invoice amount for restocking fee plus all freight charges.

5. JDM Engine Corp. is not responsible for damages occurring during shipment of any engine

6. Prior to shipment, engine and/or transmission are thoroughly cleaned and prepared. It is perfectly tied down on a palette and carefully wrapped with protective plastic wrap to prevent from any damage.

7. For all exact shipping costs, customers must contact JDM Engine Corp. via telephone or email. Shipment takes between 4-8 business days and can go to either a business or residential address. Once the order is shipped, customer will always be notified with complete shipment information.

General Engine Information

JDM Engine Corp. provides its customers with used imported Japanese engines with low mileage. External parts of the engines such as The TPS (Throttle Position Sensor) sensor on JDM Honda motors is sometimes cracked or broken, but it really is not a problem, you will simply use the one from your existing engine since it is the same, Wiring harnesses from Japan made (JDM) Honda engines cannot be used in US made Honda's since they are made for right hand drive cars. You must use your current wiring harness. Belts, hoses, and plastic covers are sometimes damaged during shipping and can be replaced by the customer’s mechanic using parts from the designated vehicle. Cosmetic damage such as scratches on valve cover is normal on used engines and does not reflect upon performance of said engine. In addition, replaceable parts such as sensors, down pipes, and air intake boxes may be missing if they are broken or damaged; JDM Engine Corp. is not responsible for these parts as the warranty only covers internal parts, which would prevent the engine from starting.

SMOG & Emissions

JDM Engine Corp. will NOT be held responsible for the failure of emissions or smog tests. Please verify with your local authorities if the engine passes smog and emissions regulations in your state.

Defective Engine Or Transmission Claim Procedure

In the unlikely event of an engine Block or Head or Transmission being defective, JDM Engine Corp. will require a detailed written description of the described defective part (meaning that the engine or transmission should not be part out, it is the JDM Engine Corps responsibility to confirm the defect parts, warranty will be void if these instructions are not followed) from a Certified Mechanic ONLY. A copy of the Mechanics certification along with his/her contact information must be provided. JDM Engine Corp. will contact the Certified Mechanic to ensure that the documents are legitimate. The Certified Mechanic may not be the individual who bought the engine from JDM Engine Corp. You may fax the required paperwork to 972-234-2548 Attention: Warranty Claims or email to info@jdmenginescorp.com attention: Warranty Claims. All Return & Defective claims should be communicated only through email, not by telephone. No Replacement or Refund will be issued with out having the Defective Product Received in our Location in the same condition as shipped. JDM Engine Corp. reserves the right to change or modify this warranty at any time. Warranty information will always be displaced on invoices. If you have any other questions or concerns, please feel free to contact us at 1-877-364-9100 or e-mail us @ info@jdmenginescorp.com

*** Return Policy updated on January 16th, 2009. There were some issues that were misunderstood by our respective customers!***